NylaSteel™
Edgerton Gear is the world's only direct distributor of NylaSteel billets and blanks for the manufacture of gears, pulleys, rollers, sprockets, and other drive components.
Nylon-steel composites
Our proprietary process fuses a core of specially treated steel to a Nylatron nylon outer ring, creating this raw material having exceptional properties.
|
The metal hub is essential for carrying horsepower and torque to the wider boundary with the nylon. From there, the benefits are all about the Nylatron: strength, durability, quiet operation, reduced friction, dampened vibration, and fatigue resistance*.
|
|
Nylon Specifications
Billets can come in lengths up to 13 inches, with outside diameters ranging from 2 inches to 15 inches. The nylon thickness must comprise at least 1/8 inch of the radius. Nylon face width can be as little as 1/2 inch or slightly less. Cores are available in standard and custom sizes and are made from your choice of stainless or cold-rolled 1117 steel. Hubs can easily extend beyond the face width of the nylon band. Please refer to the following chart for the Nylatron varieties. (see full spec sheet)
Billets can come in lengths up to 13 inches, with outside diameters ranging from 2 inches to 15 inches. The nylon thickness must comprise at least 1/8 inch of the radius. Nylon face width can be as little as 1/2 inch or slightly less. Cores are available in standard and custom sizes and are made from your choice of stainless or cold-rolled 1117 steel. Hubs can easily extend beyond the face width of the nylon band. Please refer to the following chart for the Nylatron varieties. (see full spec sheet)
1.5" diameter steel core
4.25" outside diameter
|
Nylatron Variety
NSM GSM MC901 MC907 |
Performance Advantage
maximum wear resistance maximum impact resistance heat resistant to 260 deg F food grade material |
Availability
stocked limited limited limited |
3" diameter steel core
4" outside diameter
|
Over three decades mastering the challenges of turning nylon parts will ensure your parts are high quality.
* when applied below 200 degrees Fahrenheit
|
Edgerton Gear, Inc.
20 Gear Drive Edgerton, WI 53534 |
Member of
|
Copyright © 2003-2019
Edgerton Gear, Inc. All Rights Reserved |