Gears, Sprockets, Rollers, Timing Belts, Pulleys

Spur Gears, Helical Gears, Splines, Internal Gears

Gear cutting is a precise business

Edgerton Gear, Inc.

2 Gear Drive Edgerton, WI 53534 Phone: 608-884-9445 Fax: 608-884-3862 info@edgertongear.com

Gear Products	Gear cutting is a precise business. Every gear, sprocket and pulley we cut at Edgerton Gear must be exactly right. Or it's wrong. And unacceptable for us and our customers. Every gear we ship will be to precise customer specification, without exception. Or we will promptly replace it at no additional cost.
We can handle a 1 1/2 D.P. gear up to 60 inches in diameter.

Type of Gear	Diameter	Pitch
Spur Gear	60"	1.5 to 48
Helical	60"	1.5 to 48
Metric	60"	0.5 Module to 10
HTD Pulley	60"	3mm, 5mm, 8mm, 14mm, & 20mm
Timing Belt Pulley	60"	1/5 to 1-1/4
Silent Chain Sprockets	60"	3/16 to 1-1/2
Roller Chain	60"	1/4 to 2"
Spline Shafts		up to 36" long
Circular Pitch	60"	1/8" - 1 3/8"
Gates Polychain®		3mm, 5mm, 8mm, 14mm

We have hobs for American Standard metric gears, pulleys and sprockets.

Extensive raw material inventory mean immediate response to breakdowns and short lead times.

Spur Gears Spur gears are the most common type of gears. They have straight teeth, and are mounted on parallel shafts. Many spur gears may be used at once to create very large gear reductions. Spur gears are used in many devices that you use each day: windup alarm clock, washing machine, electric screwdriver, oscillating sprinkler... But you won't find many in your car... This is because the spur gear can be noisy. Each time a gear tooth engages a tooth on the other gear, the teeth collide, and this impact makes a noise. It also increases the stress on the gear teeth. To reduce the noise and stress in the gears, most of the gears in your car are helical gears. Helical Gears The teeth on helical gears are cut at an angle to the face of the gear. When two teeth on a helical gear system engage, the contact starts at one end of the tooth and gradually spreads as the gears rotate, until the two teeth are in full engagement. This gradual engagement makes helical gears operate more smoothly and quietly than spur gears. For this reason, helical gears are used in automobile transmissions Helical gears can be mounted on perpendicular shafts Feed Rollers & Moulders Edgerton Gear makes moulder feed rollers to your specifications. The teeth are hardened and can be resharpened multiple times. We can make any diameter, width, and bore. If you have a sample, we can work off a sample. Our feed rollers are a fraction of the cost because you buy direct from the manufacturer. In addition, send them back to be resharpened like new for 1/3 of the cost. Take a Look at our newest product!

Edgerton Gears...Nylasteel Gears...Duragears

Gears, Sprockets, Rollers, Timing Belts, Pulleys

Spur Gears, Helical Gears, Splines, Internal Gears,

Search WWW Search www.duragear.com Search www.edgertongear.com